Introducing our water solutions

What is the ceramics filter ?

A ceramic filter is a filtration element made of a porous material of natural origin, usually clay.
Its microscopic structure helps retain particles, bacteria, and other contaminants from the water.

Our advantage

  • No need for power consumption
  • Light weight and easy to carry it anywhere
  • Domestic or Industrial Use
  • Quick installation
  • More cost-effective solution
  • Remove 99.9% bacteria
  • Filtration 10-15L/min per 1 unit
  • No need to change the filter for 8 to 10 years.

Our Ceramic Filter Solution

The filtration system uses a ceramic ultrafiltration membrane, whose pores have a uniform size of 0.1 μm to 23 μm in diameter, which allows for efficient filtration down to the sub-micron level.

It is able to physically filter out a wide range of bacteria and algae, including E. coli, Shigella, V. cholerae, Salmonella Typhi, and Cryptosporidium.

In the event of a blockage, the device switches to a tap to perform reciprocal work.
The device is durable, and has low filtration resistance.

The device is light and has a filtration flow rate of 10 to 15 liters per minute for domestic models and 100L/min for industrial models.
It is particularly suitable for situations where access to water is limited or where there is a risk of contamination.

It should be noted, however, that the performance of the system may be altered depending on the quality of the water.

Ceramic filter Portable system

Users can bring our system as like journey to everywhere by a carry bag. Also easy to installed everywhere.

Our advantage

  • No need for power consumption
  • Light weight and easy to carry it anywhere
  • Installation work should be within 1 to 2 min.

Mechanism and Specifications

Simple solution : Tap water

Ceramic filters remove contaminants such as E.coil bacteria

Attention
It should be noted that water other than tap water that is extremely dirty, our system cannot filter out all impurities.
It is therefore important to use a pre-filter to reduce impurities before passing them through the device.

Portable system : Sea water

Designed to be compatible with both seawater and fresh water.
Thanks to its ERS system and unique pump, it transforms seawater into fresh water while consuming a reduced amount of energy.
The built-in battery provides approximately 3 hours of runtime and can be recharged using the included solar panel or a 100V AC charger.

Our advantage

  • No need for power consumption at 3 hours.
  • Light weight and easy to carry it anywhere.
  • Installation work should be within 1 to 2 min.

Specifications

Permeable water volume 30L/hours
Weight (dry) Approximately37kg
Consumption power 120W
Battery volume 460W/h
lifting height(of a pump) 1.5meter
Power supply 120V10Ah
Dimensions 823*246*470(WHD)

Portable system

Salt content before filtration ( 2.57% )

Salt content after filtration ( 0.00%)

The ceramic filter can also be used for :

Water fountains:
Ceramic filters in water fountains provide pure, healthy water, reduce costs, and are environmentally friendly.
Ice machines:
The use of ceramic filters in ice machines ensures pure ice, improves taste, and reduces scale.
Agriculture(irrigation):
Filters improve irrigation water quality, protect irrigation systems, and increase crop yields.
Bottled of water vendor:
Ceramic filters improve the quality of bottled water while retaining essential minerals.

Our Solution to solve issues

We provide support to numerous African nations, with a primary focus on the Republic of Senegal.

While we are not a large corporation capable of building extensive facilities, we specialize in providing cost-effective solutions to address water challenges faced by numerous communities in Africa.
We are deeply committed to our mission and invite you to explore the effectiveness of our offerings.

Related Links